StoneCrete Tile System

Introducing a New Revolutionary Stamped Concrete Tile System
from the Inventor of ¼” Stamped Concrete
Stamped Concrete Tile System
  • Advantages:

    • Create your own stamped concrete driveway, pool deck, patio, walkway, porch, garage floor, and more using stamped concrete tiles made out of real cement. Do-it-yourself or have it done by a professional.
    • Easy to install with a how-to video. Half-day training classes and on the job training are also available.
    • StoneCrete tiles are made to fit together like a puzzle.
    • No concrete or overlay experience needed.
    • Seamless. Covers over cracks and joints.
    • StoneCrete Tiles will conform to uneven surfaces.
    • Achieve perfect texture on every job.
    • Available in two patterns: Random Stone and Ashlar Slate. Both patterns can be made in many colors. More patterns coming soon.
    • StoneCrete Stamped Concrete Tiles are durable, flexible, and crack resistant in all weather conditions including extreme heat and freeze thaw conditions.
  • tile-system-patio-steps

  • Before StoneCrete Tiles

    Before StoneCrete Tiles

  • During Application

    During Application

  • After StoneCrete Tiles

    After StoneCrete Tiles

Getting Started

The StoneCrete Stamped Concrete Tile System is a new revolutionary patented system developed by the inventor of ¼” Stamped Concrete. It was developed as an easier method for do-it-yourselfers and contractors to be able to achieve a stamped concrete appearance with no concrete experience required. It is recommended for patios, porches, walkways, decks, driveways, pool decks, and other applications.

Step 1:

Choose the pattern and quantity of stamped concrete tile molds you would like to purchase. The molds are reusable over and over again. One mold will make up to two tiles per day if you pour once in the morning and once in the afternoon. To calculate how many tiles you will need for your job, divide the square footage of the job by 5 square feet for the Ashlar Slate Tile and by 6 square feet for the Random Stone Tile. Example: A 200 sq. ft. walkway divided by 5 would require 40 Ashlar Slate Tiles. Figure 10% extra for a total of 44 tiles to allow for waste when cutting pieces to fit around walls and edges. If you had one mold and poured two tiles per day it would take 22 days to make 44 tiles. The more molds you have, the faster you can make tiles. Border molds and step molds are also available.

Choose the mold(s) you would like to order

You’ll update quantities at checkout.

  • contractors-tile-rack

    Contractors – Build or purchase a tile rack to pour tiles in your garage or shop.

  • diy-tile-one-or-two

    Do-it-Yourselfers – Pour tiles one or two at a time in your garage or backyard.

Watch a 3 minute video for a preview of the StoneCrete Stamped Concrete Tile System.

Step 2: Order The Products Needed To Make and Install Your Stamped Concrete Tiles.

> Tile Admix

  • tile-admix-horz-v1

    One kit makes up to 40 sq. ft. of tiles. ($1.25 per sq. ft.) Used to make tiles when added to your local cement, sand, and water. Figure 10% extra square feet to allow for waste when cutting tiles to fit next to walls and edges. (Ex. if you have 200 sq. ft. to cover, figure 220 sq. ft.).

    Note: For each kit of Tile Admix you will need to mix one 47 lb. bag of Portland Cement and one 50 lb. bag of Play Sand available at Home Depot. Purchasing these ingredients locally helps save on shipping cost. See our How-to-Video and StoneCrete Tile Instruction Manual for mixing and application instructions.

> Tile Adhesive

  •  adhesive-primer-image-v2

    One gallon will lay up to 75 sq. ft. of tiles at $55 per gallon (or $0.73 sq. ft.) when purchased in a 3 gallon kit. Used as the adhesive to install tiles when added to your local cement, and acetone. Apply using a goop loop texture roller available at Home Depot in the paint department. See How-to-Video and StoneCrete Tile Instruction Manual for mixing and application instructions.

> Tile Grout Mix

  • One 28 lb. box will grout up to 500 sq. ft. of tiles at $45 per kit (or $0.09 sq. ft.)

    Used to grout in-between each tile after they have been laid with Tile Adhesive. See How-to-Video and StoneCrete Tile Instruction Manual for mixing and application instructions.

    tile-grout-mix-image-combo

> Roll-Top Cement

  • One 1 1/2 gallon kit will cover up to 250 sq. ft. at $60 per kit (or $0.24 sq. ft.)

    Used to color the tiles after installation and grouting to provide a uniform cement color. Roll-Top is real polymer modified cement that rolls on like paint. Apply using a 3/4” or 1 1/4” nap paint roller. Available in all the colors on our Davis Color Chart or custom colors. See How-to-Video and StoneCrete Tile Instruction Manual for mixing and application instructions.

    roll-top-cement-image-combo-v3

> Davis Integral Color

  • Iron oxide powder pigments for coloring regular concrete or Roll-Top Cement. Available in 40 colors. See the Davis Color Chart below or request a color chart be mailed to you for better accuracy. You can also use your local iron oxide pigments or liquid concrete colors from a concrete supply store. Add one ounce at a time of the color pigment chosen while mixing Roll-Top with water and a mixing drill. Have the color chart available while mixing to check the color in the Roll-Top pail with the color on the chart. Add more color one ounce at a time as needed until you achieve the color on the chart.

    • Light colors will require 1-3 oz of pigment per kit of Roll-Top
    • Medium colors will require 4-8 oz.
    • Dark colors will require 10-14 oz.
  • Color Chart



    View All
    or
    Print/Download PDF

> Color Antique Powder

  • One 3 lb. bottle will cover up to 3000 sq. ft. at $30 per bottle (or $0.01 per sq. ft.)

    Used to apply a darker highlight antique color over the Roll-Top Cement base color. Mix 2-4 ounces with 1 gallon of water and spray using a pump-up sprayer. Available in the following colors from our Davis Color Chart: Sandstone, Rustic Brown, Pebble, Yosemite Brown, Silver Smoke, Omaha Tan, Harvest Gold, Dark Gray, Bayou, Cocoa, Tile Red, San Diego Buff, Spanish Gold, Mesa Buff, Palomino, Flagstone Brown, Sierra, Adobe, Kailua, Cobblestone, Graphite, and Green Slate. (Request a color chart.)

    color-antique-powder-image-combo-v2

> StoneSeal

  • One gallon covers up to 300 sq. ft. at $45 per gallon (or $0.15 per sq. ft. per gallon per coat).

    Used as the topcoat sealer over the tiles, Roll-Top cement, and Color Antique Powder to provide a durable stain resistant finish. Apply two coats using an acetone resistant pump-up sprayer. The first coat can be thinned 1 to 1 with acetone. The second coat can be thinned 3 parts sealer to 1 part acetone.

    stone-seal-image-combo-v2

  •  

The total cost for all of the products above including two coats of StoneSeal = approximately $2.80 per sq. ft. As a comparison, regular outdoor slate or ceramic tiles will range from $5.00-$6.00 per square foot for all the materials needed for installation. In most areas it will cost $10.00 – $12.00 per sq. ft. to have your concrete removed and replaced with stamped concrete. By doing it yourself with the StoneCrete Stamped Concrete Tile System you can save over half the normal cost. See discount packages for more savings. (Price does not include molds and shipping cost.)

Optional Repair Products

Crack and Joint Repair

> Tile Adhesive

  • Besides being used as an adhesive for the tiles, Tile Adhesive is also used to fill any cracks and joints in the area where the tiles will be laid. Measure how many linear feet of cracks and joints there are and order extra Tile Adhesive as needed. One 1 1/2 gallon kit will fill up to 180 lin. ft. of cracks or joints 1/4” wide x 1/2” deep. Mix Tile Adhesive with 1 part #30 or finer silica sand for cracks under 1/4” wide, or play sand for cracks 1/4” or wider to create a semi-pourable patching mix.

    Before ordering extra Tile Adhesive, check to see if you already have enough with the amount you ordered to lay your tiles. For example, if you only needed enough Tile Adhesive to lay 100 sq. ft. of tiles, but you had to order a 1 1/2 gallon kit which covers 135 sq. ft., you may already have enough left over to fill your cracks and joints.

    adhesive-primer-image-combo-v3

> Vertical Patching Mix

  • Used to fill in vertical grout lines between tiles and to fill the gap in-between where the concrete and tiles meet around the vertical edges. Just add water.

    20 lb. box $35 per 20 lbs. 250 ft. of vertical grout lines or edges $0.14 per ft. (Measure how many feet of vertical edges and times by $0.14)

> Polymer Patching Mix

> Joint Repair Fabric

  • (4” x 300’ Roll) $40 – Used as extra reinforcement over joints for added crack resistance. After filling joints with Tile Adhesive mixed with sand, Joint Repair Fabric can be embedded over the joints using Tile Adhesive with no sand and a paintbrush.

    joint-repair-image-1

> Release Oil

  • oil-release-lifestyle

    A concentrated release oil to be mixed with 100% mineral spirits in order to create a tile mold release agent. Mix 4 oz. of Release Oil with 1 gallon of 100% mineral spirits. Rub a small amount on each mold using a cotton rag 10-15 minutes prior to pouring the tile admix into the mold. This will make it easier to remove the tiles from the molds. Do not leave tiles in the molds for more than 24 hours. The molds will peel off the tiles the easiest within 6-12 hours.

Warranty & Disclaimer

The StoneCrete Tile System has been applied successfully on many jobs throughout the country in almost every climate condition since 2013. It is important to follow the instructions and watch the tutorial videos on how to apply each product to achieve the best results. It is up to each applicator to prepare the surface and install the system properly. StoneCrete Systems warrants its products to be of the highest quality and free from defects. Our only warranty with respect to the products we sell, and our sole obligation, is to replace, or give credit for any of our products that prove to be defective. Any claim under this warranty must be made no later than one year from the date of purchase. StoneCrete Systems makes no other warranties expressed or implied, or statutory such as warranties of merchantability or fitness for a particular purpose. In no event shall StoneCrete Systems be liable for consequential or incidental damages. The product buyer assumes all responsibility or risk whatsoever as to the result of the use of the products purchased from StoneCrete Systems or its suppliers, whether used singly or in combination with other products or substances. Our warranty excludes problems that may occur following product application due to moisture below a substrate, cracking, or problems associated with the substrate on which the product or products are applied. It is the responsibility of each product buyer to determine the suitability of each product for his or her particular purpose.

Discount Packages

  • Ashlar Slate Starter Package $845 (Normally $959)

    Includes everything you need to make and install up to 250 sq. ft. of Ashlar Slate tiles. Some products below will do more than 250 square feet. The cost for the products below without the mold is under $3.00 per square foot and less than $4.00 per square foot with the mold.

    • 1 Ashlar Slate Mold
    • 6 kits of Tile Admix
    • 3 gal. kit of Tile Adhesive
    • 14 lb. kit of Tile Grout Mix
    • 1½ gal. kit of Roll-Top Cement
    • 1 Davis Integral Color
    • 3 lbs. Color Antique Powder
    • 2 gallons StoneSeal

    Note: If you need to cover more square footage, you can order more of each product in our shopping cart under Tile System Products.

    ashlar-package-page-v2

    ORDER IT NOW!

  • Random Stone Starter Package $864 (Normally $979)

    Includes everything you need to install up to 250 sq. ft. of Random Stone tiles. Some products below will do more than 250 square feet. The cost for the products below without the mold is under $3.00 per square foot and less than $4.00 per square foot with the mold.

    • 1 Random Stone Mold
    • 6 kits of Tile Admix
    • 3 gal. kit of Tile Adhesive
    • 14 lb. kit of Tile Grout Mix
    • 1½ gal. kit of Roll-Top Cement
    • 1 Davis Integral Color
    • 3 lbs. Color Antique Powder
    • 2 gallon StoneSeal

    Note: If you need to cover more square footage, you can order more of each product in our shopping cart under Tile System Products.

    random-stone-package-page-v2

    ORDER IT NOW!

  • 250 Square Foot Products Package without Molds $667 (Normally $760)

    This package is for those who already have molds and only need the products. Some products below will do more than 250 square feet. The cost for the products in this package is under $3.00 per square foot.

    • 6 kits of Tile Admix
    • 3 gal. kit of Tile Adhesive
    • 14 lb. kit of Tile Grout Mix
    • 1.5 gal. kit of Roll-Top Cement
    • 1 Davis Integral Color
    • 3 lbs. Color Antique Powder
    • 2 gallons StoneSeal

    Note: If you need to cover more square footage, you can order more of each product in our shopping cart under Tile System Products.

    250-square-foot-package-page-v2

    ORDER IT NOW!

    Ashlar Slate Mold Discount Package $1433 (normally $1592)

    Each Ashlar Slate Mold will make a 5 sq. ft. tile. One kit of Tile Admix will make 8 Ashlar Slate tiles or 40 sq. ft. in one pour when added to your local cement and sand. It takes approximately 15 minutes to mix and pour 8 tiles and to clean-up once you’re set up properly.

    • 8 Ashlar Slate Molds  (28″ x 28″) – (One kit of Tile Admix will make 8 Ashlar Slate tiles).
    ashlar-mold-page-v1
    ORDER IT NOW!

  • Slate Border and Step Mold Package $640 (Normally $712)

    These molds are great to have when a border is desired around the outside edges of the Ashlar Slate and Random Stone Tiles and to provide a stair nosing when doing porches and steps. They are also nice to have around when pouring the larger tiles in case you have any leftover mix you don’t want to waste.

    • 4 Slate Border Molds (12” x 28”)
    • 4 Step Nosing Molds (3” x 28”)

    slate-border-and-step-mold

    ORDER IT NOW!

    Random Stone Mold Discount Package $1380 (normally $1533)

    Each Random Stone Mold will make a 6 sq. ft. tile.  One kit of Tile Admix will make up to 7 Random Stone tiles or 40 sq. ft. in one pour. It takes approximately 15 minutes to mix and pour 7-8 tiles and to clean-up once your set up properly.

    • 7 Random Stone Molds (34″ x 34″) – (One kit of Tile Admix will make 7 Random Stone tiles).
    random-stone-34x34ORDER IT NOW!

Start Your Own Business Discount Package

If you would like to start your own business making and installing StoneCrete Tiles, our Start Your Own Business Package is a great option. Save hundreds of dollars! One 500 square foot job at $8-$10 per sq. ft. will almost pay for this package. Training is available.

Note: Deduct an additional $400 if you do not want the tile rack. We can provide step-by-step instructions with pictures on how to build your own.

business-discount-package-page-v2

Package Includes:

  • Tile Rack and Molds

    • 1 Tile Rack (for making up to 12 tiles at a time. Comes with everything shown except molds and melamine shelves).
    • 8 Ashlar Slate Molds
    • 7 Random Stone Molds
    • 4 Slate Border Molds
    • 4 Step Molds

    Note: The quantity of each of the molds listed above can be changed to create a custom package within the same price range as the molds shown. For example you can order more Ashlar Slate molds and less Random Stone or any combination you choose.

  • 500 Square Feet of Tile Products

    • 13 kits of Tile Admix
    • 6 gallons of Tile Adhesive
    • 1 28 lb. box of Tile Grout Mix
    • 2 kits of Roll-Top Cement
    • 2 Davis Integral Color
    • 2 bottles of Color Antique Powder
    • 5 gallons of StoneSeal

    Instruction manual with pictures also included

    Note: Some of the products above will do more than 500 sq. ft. due to the packaging size which makes the square footage price seem higher. The actual square footage price for the products in this package are under $3.00 per sq. ft.

Note: Deduct an additional $400 if you do not want the tile rack. We can provide step-by-step instructions with pictures on how to build your own.

Also Includes 1 Day of Free Training at StoneCrete Systems Facility in Utah.
Provide your own transportation, food, and lodging and we will provide a free one-on-one day of training on how to do the StoneCrete Tile System, and a job tour.  On the job training is also available at $500 per day plus travel expenses, and lodging. Call 801-247-1347 to schedule an appointment.

Normally $5852. Discount Package Price = $5231

ORDER IT NOW!

StoneCrete Tile Job Examples

porche-steps

  • pool-patio-before-after-1

  • pool-patio-before-after-2

  • pool-patio-before-after-3

  • StoneCrete-Tile-System-P3-9

  • StoneCrete-Tile-System-P3-11

  • pathway-1

  • StoneCrete-Tile-System-P3-10

  • driveway-1-before

  • driveway-1-after

  • driveway-2-before

  • driveway-after-v2

  • room-1-before

  • room-2-after

  • steps-1

  • steps-2

  • porche-2-before

  • porche-2-after-v2

walkway-1

  • driveway-4-before

  • driveway-4-after

  • driveway-5-before

  • driveway-5-during

  • driveway-5-after-1

  • driveway-5-after-2

driveway-8-before

driveway-8-after

pool-2-1

pool-2-2

  • terrasse-before

  • terrasse-after

steps-3-1

steps-3-2

QUESTIONS / COMMENTS / CONTACT US